Dual Port Hydraulic Service Rotary Joints
Two Port Low Speed Rotary Joints suitable for Hydraulic Oil, Vacuum, Brake Fluid application
The Type-MSU70 is 2 passage rotary union for transfer of media like air/vaccuum and Hydraulic. Pair of Bearings for alignment of rotor with housing. Self supported rotary union with aluminium housing and stainless steel rotor. This equipment is manufactured by using premium raw materials. No inter passage leakage on dual flow design.
Dual Port Rotary Joint For Hydraulic Service
Dual Passage Rotary Joints For Hydraulic Service
MSU70 Rotary Joints
- Dualflow design
- Rotating union is self-supported
- Axial housing connection
- Hardened Sealing surfaces
- Special Seals
- Ball bearings lubricated for life
- Low torque and weight optimised design
- Aluminium housing; stainless steel or carbon steel rotor, depending on model
| Elastomer | Viton, EPDM, NBR, |
| MOC | SS 316, Carbon Steel, Aluminium |
| Bearing | Composite Bronze Bearing, Ball Bearing |
| Size | 1/8″ (DN08) – 1 1/2″ (DN20) |
| Media | : Air, Vacuum, Hydraulic oil, water |
| Max. Air Pressure | : 10 bar |
| Max. Vacuum | : 7 kPa |
| Max. Hydraulic Pressure | : 210 bar |
| Max. Brake fluid Pressure | : 207 bar |
| Max. Temperature | : 120°C |
| Max. Speed | : 250 rpm |
Do Not Work With Maximum Pressure At Maximum Speed.
- Threaded Rotor Mono Flow And Dual Flow
- Quick Release Rotor Mono Flow And Dual Flow
- Flanged Rotor Mono Flow And Dual Flow
- Oil And Gas
- Plastics
- Agriculture And Construction
- Food And Medical
- Chemical
- Hydro Power
- Printing And Packaging
- Tire And Rubber
“Deublin” 1690,1790,1890 series
“Rototech” 7000,7000TE series
“Rotofluid” 700 series
“Rotoflux” M series
Duffnorton” 1600 series
“Fourwent” FDU 1700 series
“Rotary System” RU010 series
Related Products
