General Purpose Rotary Joints For Steam Hot Water Service
General Purpose Steam Rotary Joints Developed In Order To Manage The Flow Of High Temperature Liquids and Suitable For Hot Water, Steam and Hot Oil Service
The Type-MSU30 has mono and dual port for transfer of media. Pair of Ball Bearings for alignment of rotor with housing. Single or Multi Spring for Seal faces and Elastomers. A key maintenance feature is the
cartridge design. This is easily replaceable & serviceable (on site) used for water and environment of severe condition i.e poor water quality.This equipment is manufactured by using premium raw materials.
Mono Flow Rotary Joints For Steam and Hot Oil Service
MSU30 Rotary Joints
- Monoflow and dualflow design
- Self-supported rotating union
- Radial or Axial housing connection
- Balanced mechanical seals
- Easy and quick replacement of sealing components
- E.L.S. (Extended Life Service) seal combination for poor water quality
- Carbon Steel, Stainless Steel housing and stainless steel rotor
- Contacted parts made of 316 stainless steel
- Full Media Flow
| Seal Combinations | Carbon Graphite/Bronze for water;
Carbon Graphite/Ceramic or SiC for hot oil, hot water and saturated steam; Tungsten Carbide/Ceramic or SiC for severe conditions such as poor water quality |
| Elastomer | Viton, Graphoil, EPDM |
| MOC | SS 316, Carbon Steel, C.I |
| Size | 1/4″ (DN08) – 2″ (DN50) |
| Media | : Water, Steam, Hot Oil |
| Max. Pressure | : 70 bar |
| Max. Temperature | : 250°C |
| Max. Speed | : 3500 rpm |
Do Not Work With Maximum Pressure At Maximum Speed.
- Oil And Gas
- Paper And Corrugating
- Printing And Packaging
- Plastics
- Tire And Rubber
“Rototech” 400 series
“Rotofluid” 50 series
“Rotoflux” G series
“Haag-zeissler” 9001G-ND series
“Filton” C.B/C.B.N series
Related Products
