Rotary Joints For Hot Water Service
General Purpose Stainless Steel Rotary Joints Suitable For Water Service, Hot Water Service, Steam and Hot Oil Application
The Type-MSU20 has all media contacting metal parts of Stainless Sleel. It has mono and dual port for transfer of media. Pair of Ball Bearings tor alignment of rotor with housing. Single Spring tor Seal faces. This equipment is manufactured by using premium raw materials.
Rotary Joints For Hot Water Service
Stainless Steel Rotary Joints For Hot Water Service
MSU20 Rotary Joints
- Monoflow and dualflow design
- Self-supported rotating union
- Radial or Axial housing connection
- Balanced mechanical seals
- Easy and quick replacement of sealing components
- Ball bearings lubricated for life
- E.L.S. (Extended Life Service) seal combination for poor water quality
- Carbon Steel, Stainless Steel housing and stainless steel rotor
- Wetted parts made of 316 stainless steel
- Full media flow
Seal Combinations | Carbon Graphite/Bronze for water; Carbon Graphite/Ceramic or SiC for hot oil, hot water and saturated steam; Tungsten Carbide/Ceramic or SiC for severe conditions such as poor water quality |
Elastomer | Viton, EPDM, NBR, |
MOC | SS 316, Brass, Carbon Steel, C.I |
Size | 1/4″ (DN08) – 2″ (DN50) |
Media | : Water, Steam, Hot Oil |
Max. Pressure | : 70 bar |
Max. Temperature | : 121°C |
Max. Speed | : 3500 rpm |
Do Not Work With Maximum Pressure At Maximum Speed.
- Threaded Rotor Mono Flow And Dual Flow
- Quick Release Rotor Mono Flow And Dual Flow
- Flanged Rotor Mono Flow And Dual Flow
- Semiconductor
- Oil And Gas
- Paper And Corrugating
- Printing And Packaging
- Plastics
- Agriculture And Construction
- Food And Medical
- Tire And Rubber
- Chemical